Supported File Formats
File formats supported by HyperLife.
SN (Uniaxial and Multiaxial)
| Format | Extension |
|---|---|
| OptiStruct Radioss Note: Radioss result files can imported via the Hyper3D
format.
|
.h3d |
| Nastran | .op2 |
| Abaqus | .odb |
| ANSYS | .rst |
| LS-DYNA | .d3plot |
EN (Uniaxial and Multiaxial)
| Format | Extension |
|---|---|
| OptiStruct Radioss Note: Radioss result files can imported via the Hyper3D
format.
|
.h3d |
| Nastran | .op2 |
| Abaqus | .odb |
| ANSYS | .rst |
| LS-DYNA | .d3plot |
Dang van FOS
| Format | Extension |
|---|---|
| OptiStruct Radioss Note: Radioss result files can imported via the Hyper3D
format.
|
.h3d |
| Nastran | .op2 |
| Abaqus | .odb |
| ANSYS | .rst |
| LS-DYNA | .d3plot |
Seam Weld
| Format | Extension |
|---|---|
| Grid Point Forces from OptiStruct | .h3d |
| Grid Point Forces from Nastran | .op2 |
Spot Weld
| Format | Extension |
|---|---|
| Direct Element Forces from OptiStruct | .h3d |
| Direct Element Forces from Nastran | .op2 |
Note: Support will be extended to further solver results in upcoming builds.
Transient Fatigue Analysis (SN, EN)
| Format | Extension |
|---|---|
| OptiStruct Radioss Note: Radioss result files can imported via the Hyper3D
format.
|
.h3d |
| Nastran | .op2 |
| Abaqus | .odb |
| ANSYS | .rst |
| LS-DYNA | .d3plot |
Modal Superposition
| Format | Extension |
|---|---|
| OptiStruct | .h3d |
| Nastran | .op2 |
| Format | Extension |
|---|---|
| OptiStruct | .pch |
| MotionSolve | .mrf |
| Nastran | .pch |
Random Response Fatigue with PSD Stresses
| Format | Extension |
|---|---|
| OptiStruct | .h3d |
Random Response Fatigue with Frequency Response Analysis and PSD Loading
| Format | Extension |
|---|---|
| OptiStruct | .h3d |
| Nastran | .op2 |
| Abaqus | .odb |
Sine Sweep Fatigue
| Format | Extension |
|---|---|
| OptiStruct | .h3d |
| Nastran | .op2 |
| Abaqus | .odb |